Aero System; Pulsation - RIHO Olivia Mode D'emploi

Whirlpool TLCD - Manual
EN
If you have a Hydro whirlpool where the back jets and feet jets are switchable, follow the next steps:
- First activate the Hydro function and press the SET button that will appear.
- With the arrow keys you can switch between the different combinations. Then press OK to confirm your selection.

4.1.8 Aero system

This button is used to activate and deactivate the Aero-system.
- Short touch, brings you to the aero menu.
- Long touch, deactivates the aerosystem.

4.1.9 Pulsation

With this button the speed of the motor is controlled for a pulsating effect.
This counts for both the Hydro as well as the Aero pulsation function.
- By touching the pulsation button the system will automatically pulsate the water between 40% and 100% over a time of
circa 15 seconds. Also a button that looks like an unlocked lock will appear on the screen.
- By touching the open lock the system will automatically lock the speed of the motor at the current speed. The lock
changes from unlocked to locked.
- By pressing the closed lock the system will again automatically begin from 100% and start the pulsating cycle. The lock
changes again from locked to unlocked.
- The pulsation mode can be turned of by pressing the pulsation button again.
If you want both pulsations (Hydro & Aero) on, this is possible. The pulsating effects per system are synchronised for
maximum effect.
4.2 Users selection
4.2.1 Users selection "standard"
With this function you select the preprogrammed system settings. Every user (1 till 6) has his own
preprogrammed system settings, for example lights on/off, Hydro on/off, pulsation mode, temperature,
puls duration etc.
When you touch this button short you will go to the user settings menu. Now you can choose between
6 users and press OK to confirm. You will automatically return to the home screen where your selected
profile appears.
-17-