Philips Satinelle Ice HP6491 Instructions page 11

Troubleshooting
Problem Cause
Reduced The epilator is being moved
epilating in the wrong direction.
performance.
The epilating head is placed
on the skin at the wrong
angle.
The epilating head does not
touch the skin.
The skin was moistened with
water, or a cream or other
skincare product was applied
prior to epilation.
The appliance The socket to which the
does not appliance is connected is not
work. live.
The appliance is not
switched on.
The epilating head has not
been attached correctly.
ENGLISH
Solution
Move the appliance against the
direction of hair growth.
Make sure you place the
appliance perpendicularly onto
the skin.
Make sure both the epilating
head and the skin cooler are in
proper contact with your skin
during epilation.
Make sure your skin is entirely
dry and free from grease. Do
not put any cream, body milk or
other skincare product on your
skin before you start epilating.
Make sure the socket you use is
live. If you are using a socket in
a bathroom cabinet, you may
need to switch on the light to
activate the socket.
Make sure that the appliance is
plugged in and switched on.
Place the epilating head on the
appliance and press it onto the
appliance until it snaps home
('click').
11