First Use; Preliminary Cleaning; Use Of The Oven; Display Description - Candy FCDP818VX Notice D'emploi Et D'installation

2.3 First Use

PRELIMINARY CLEANING

Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash all accessories and wipe inside
the oven with a solution of hot water and washing up liquid. Set the empty oven to the maximum temperature and leave on for about 1
hour, this will remove any lingering smells of newness.

3. Use of the Oven

3.1 Display description (full touch double cavıty)
1. On/Off
2. Extra Functions
3. Arrow (-)
4. Select/Stop
5. Arrow (+)
6. Cavity
7. Cooking functions
CAVITY: When the separator is placed inside the oven, you can select the lower or upper cavity by pressing the
When you select a cavity, you need to set the desired cooking function by pressing the F key and then press SELECT to confirm the choice.
It is now possible to set the cooking temperature by pressing the " <" and ">" keys, confirming your selection by pressing SELECT.
Following this procedure the oven starts to cook.
If you want to use the oven as a single cavity one, you have to remove the separator.
Press F to select the desired cooking function and confirm by pressing SELECT. Set the temperature by pressing the "<" and ">" keys and
confirm the selection by pressing SELECT. Following this procedure the oven starts to cook.
NOTE: when a cavity is selected, all the information relating to cooking functions, temperature and time refer to the cavity that was selected
previously.
ON/OFF: The oven is switched on and off with this button
EXTRA: If the oven is switched off, the display shows the clock. When the oven is inactive, all
the functions are available except the cooking duration and end of cooking.
If the clock is not set, the oven does not work: the display flashes, showing "12:00"
and the only functioning key is Extra. From the Extra key, the following functions can be set:
1 2 3 4
EN 06
5 6
7
button.