Picture/Screen Adjustment; Picture Adjustment - Pioneer PDA-5003 Mode D'emploi

PICTURE/SCREEN Adjustment

PICTURE adjustment

MENU
5/∞
2/3
SET
Display operating Remote control unit
panel
1
Press the MENU button to display the menu
screen.
MENU
PICTURE SCREEN
:
CONTRAST
:
BRIGHTNESS
:
COLOR
:
TINT
:
SHARPNESS
PICTURE RESET
ENTER
SET
2 Use the 5/∞ buttons to select the adjustment
item, then press the SET button.
MENU
PICTURE SCREEN
:
CONTRAST
:
BRIGHTNESS
:
COLOR
:
TINT
:
SHARPNESS
PICTURE RESET
SET ENTER
3
Use the 2/3 buttons to adjust the picture quality
as desired.
BRIGHTNESS
SET
S E T
28
En
MENU
2/3
SET
5/∞
INPUT1
SETUP OPTION
0
0
0
0
0
EXIT
MENU
INPUT1
SETUP OPTION
0
0
0
0
0
MENU EXIT
:
0
EXIT
M N U
E
4
Press the SET button.
Pressing the SET button writes the value into the
memory and returns the display to the step 2 screen.
5
When the setup is finished, press the MENU
button to exit the menu screen.
Note
Make these adjustments for each input (INPUT1 to INPUT5) and
signals.
[PICTURE] mode adjustment items
Below are brief descriptions of the options that can be set
in the [PICTURE] mode.
CONTRAST ············· Adjust according to the surrounding
brightness so that the picture can be
seen clearly.
BRIGHTNESS ·········· Adjust so that the dark parts of the
picture can be seen clearly.
COLOR ···················· Adjust to the desired depth (Setting
to a slightly deep color will create a
natural looking picture).
TINT ························· Adjust so that flesh tones look
normal.
SHARPNESS ··········· Normally set to the center position.
To create a softer picture, set to the
left of center. To create a sharper
picture, set to the right of center.
Note
Consult the Operating Instructions for your Plasma Display
regarding PICTURE adjustment when inputting computer signals.
To reset [PICTURE] mode settings to the default
If settings have been adjusted excessively or the picture
on the screen no longer appears natural, it may prove
more beneficial to reset the [PICTURE] mode to default
settings instead of trying to make adjustments under
already adjusted conditions.
1 In step 2 in the previous procedure, use the 5/∞
buttons to select [PICTURE RESET], then press the
SET button.
PICTURE RESET
YES
SET SET
2 Use the 2/3 buttons to select [YES], and press
the SET button.
All [PICTURE] mode settings are returned to the
factory set default.
NO
MENU EXIT