Product Description And Intended Use; General Warnings - Nice HSTS2 Instructions Et Avertissements Pour L'installation Et L'utilisation

1
WARNINGS AND GENERAL PRECAUTIONS

1.1 - General warnings

• The HSTS2 touch screen keypad can only be used with Nice automation
units and with the HSCU2 series alarm control units. Any use other than as
described in this manual is strictly prohibited!
• Do not make any changes to any part of the product, except those described
in this manual. Unauthorised operation will cause malfunctions; Nice declines
all responsibility for damage resulting from products which have been arbi-
trarily modified.
• To use the touch screen keypad, just touch the surface with your finger or
with the stylus provided, applying a little pressure (do not press hard!).
Using sharp objects is forbidden since they can damage the display beyond
repair.
• During installation and use of the product, ensure that no foreign bodies (sol-
ids or liquids) penetrate any open devices.
• If in doubt during installation or programming, do not attempt further opera-
tions and contact Nice support service.
• Change the battery, observing the polarity shown.
• Manufacturer liability: Nice declines all liability for any faults resulting from
incorrect programming and use of the device.
• Guarantee (summary of terms): Nice guarantees its product against con-
cealed defects for a period of 3 years as of the date of manufacture. The
guarantee applies to direct purchasers from Nice. No guarantee is envisaged
for the end user, who in the event of faults must contact the specific installer
or retailer.
• Exclusions from the guarantee: the guarantee does not cover aesthetic
parts, the display, parts subject to normal wear or normal consumables such
as batteries and accumulators.
• The product packaging material must be disposed of in full observance of
current local legislation.
2
PRODUCT DESCRIPTION AND
INTENDED USE
The HSTS2 touch screen keypad is the radio interface that can control the
entire Nice Home alarm system with HSCU2 control unit and also be used to
control up to 99 Nice automation units; e.g. gates, curtains, shutters, lights,
etc.
HSTS2 features an icon menu and an integrated voice guide that make it easy
to use. It has a voice answering machine which lets you record and listen to
voice reminders. It has 4 keys (fig. 2) to be used to control the automation units
in an immediate manner.
In addition, HSTS2 is fitted with a HSB1 transponder key reader (fig. 1) that
provides for quick arming and disarming of the alarm system.
HSTS2 is powered by two "non-rechargeable" batteries (fig. 3). It is possible to
use rechargeable batteries with the use of a suitable HSTSA1 table/wall base
(optional) with integrated battery charger.
Thanks to the supports supplied, the touch screen keypad may be wall mount-
ed or placed on its table base (fig. 1); see chapter 8.
1
HSTS2
HSB1
English – 1