Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5
ALARM, USER MANAGEMENT
5.1 - Activating and deactivating the system
and press the icon
In the following window, press the icon
Enter your access code and confirm with
Confirm again with
to activate all the zones associated with the access
code, or click on the zones to be excluded then confirm with
The control unit confirms the system's activation by visualising an appropriate
message on the display, in addition to the time remaining for the user to exit
without causing an accidental alarm.
If there are any Warnings or open doors/windows highlighted by the symbol
, the touchscreen will show the list of messages. Select one then in the
following window select:
- ACTIVATE and confirm with
- CANCEL and confirm with
Close any open doors/windows and check the events memory. If the messa-
12 – English
ACTIVATION: Switch on the touchscreen
.
to force the system's activation.
to exit without activating the system.
ges still appear, contact the installer.
DEACTIVATION: Switch on the touchscreen and press the icon
In the following window, press the icon
Enter your access code and confirm with
The control unit will confirm the system's deactivation by visualising an appro-
priate message on the display. The system will only deactivate the zones asso-
ciated with the access code.
The touchscreen display will visualise the system's status and the activated
zones.
5.2 - Activation - Deactivation with transponder key
The system can be activated or deactivated using an appropriate HSB1 tran-
sponder key (supplied separately as an accessory), enabling the user to avoid
entering the access code.
The transponder key reader activates whenever the tou-
chscreen is switched on, and is visible through the icon
(the function will only activate if linked to at least one tran-
sponder key).
ACTIVATION: Switch on the touchscreen and place the transponder key near
the lower left corner of the touchscreen. A
beep will confirm the system's activation.
If the icon
does not appear, press the
icon
Scroll the window on the bottom and activa-
te the transponder key reading function by
selecting the relevant icon.
The line on the bottom will show the key rea-
der icon
as active.
.
If the icon does not appear, press the icon
again.
If there are any Warnings or open doors/
windows highlighted by the symbol
touchscreen will show the list of messages.
Select one then in the following window
select:
- ACTIVATE and confirm with
ce the system's activation.
, the
to for-
Publicité
Table des Matières
