Wall Mounting - Nice HSTS2 Instructions Et Avertissements Pour L'installation Et L'utilisation

8
SUPPORT BASE

8.1 - Wall mounting

• Check that the surface on which the product is to be mounted is sufficiently
robust.
• Do not install the support close to strong heat sources.
01. Mark on the wall the mounting points, drill holes, insert the screw anchors
provided (fig. 39 A).
02. Fasten the support in place with the screws supplied (fig. 39 B).
03. Hook the support onto the wall and insert the touch screen (fig. 39 C).
8.2 - Mounting on tabletop support
Warnings – Place the support on a flat surface where it will be protected
against accidental falls.
Assemble the tabletop support:
01. Insert part (b) in the support (a) as shown in fig. 40 A.
02. Slide bracket upwards as shown in (b) fig. 40 B.
39
A
B
C
2
1
40
A
b
a
B
2
1
b
English – 15