Components; Warnings - Sagola 4600 Xtreme Manuel D'utilisation

20/21

4. Components

1 Air nozzle
2 Head packing gland
3 Trigger
4 Valve packing gland
5 Digital pressure gauge access plug
6 Air inlet
7 Air valve
8 Product regulator
9 Spray width regulator
10 Product filter
11 Non drip plug
12 Pressure gauge sight glass
13 Air flow regulator
14 Product Cup

5. Warnings

· Before putting the unit into operation, and especially after each cleaning and/or repair
operation, a check must be made that the gun components are securely tightened and that the air
and/or product hoses are airtight (no air leaks). Faulty parts must be replaced or repaired as
appropriate.
· The gun is easy to handle thanks to its design and the simplicity of its mechanisms. No special
training is required for handling the gun. Use the gun according to the operating, maintenance
and safety instructions indicated in this manual and follow the application methods indicated to
obtain the required quality of finish.
· Before putting the unit into operation, we recommend you to clean the gun as this has been
subjected to functional tests and before packaging it is treated internally with a protective coating,
some of which may still remain. Apply thinner to eliminate this. Remove any residual grease
applied during assembly.
· Ensure that the products to be applied are chemically compatible with the components these
come into contact with (aluminium, stainless steel, polythene and acetylene resin).
· Do not use corrosive or abrasive products.
The gun has been designed for long service and can be used with the majority of the products
available on the market. Its use with highly aggressive products will quickly increase the need for
maintenance and spares. If you need to apply special products, please contact SAGOLA S.A.
· Read and apply all the information, instructions and safety measures indicated by the manufac-
turer of the products to be applied (thinners, etc.) as these may provoke chemical reactions, fires
and/or explosions, or be toxic, irritant or harmful and in all cases dangerous for the health and
personal safety of the user and of other persons nearby
· Mix, prepare and filter the product to be applied in accordance with the
instructions, ensuring that any foreign bodies are prevented from
manufacturer's
spoiling the quality of finish and application. Should there be any doubt relating
to the purity of the product, its composition, etc., please contact your supplier.
· Control the viscosity of the product to be applied with the SAGOLA Viscosimeter
- Code 56418001
14
10
2
1
3
(see chapter on Safety and Health).
ENGLISH
11
9
4
8
7
12
13
6
5