Before The First Use - Domo DO1090C Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
1
2

BEFORE THE FIRST USE

·
Remove all packing materials and carefully clean the appliance before first use (See "Cleaning and
maintenance").
·
Attention: when using the appliance for the first time, the baking trays may emit a small amount of
smoke and odour. This is normal. Clean the appliance with absorbent paper or a clean, dry cloth to
remove any residue.
·
Place the unit preferably on a surface that is easy to clean. The surface should also be heat-resistant.
Do not place the appliance on an untreated wooden surface.
·
Make sure that there is enough ventilation around the grill.
FITTING AND REMOVING THE BAKING TRAYS
1.
Remove the mains plug from the wall socket and wait until the appliance has
cooled down completely. Choose the sandwich toaster, waffle tray or grilling
tray. Attention: never use the appliance with only 1 baking tray. Always make
sure 2 baking trays are fitted correctly.
2.
Place the baking trays in the appliance through the openings provided along
the hinge. The baking trays have a wider end on one side than the other. The
wide end should slide into the appliance along the hinge of the appliance.
Then click on the other side.
3.
To remove the baking plates from the appliance, slide the release lever out.
Attention: do not allow the baking trays to come into contact with metal cutlery
or other metal objects in order to avoid causing damage to the non-stick coating.
Always use a heat-resistant plastic or wooden spatula.
USE
1.
Place the appliance on a dry, flat surface and ensure there is adequate ventilation.
2.
Choose from one of the 3 sets of baking trays supplied: sandwich toaster, waffle or grilling. Fit the
baking plates (see chapter, "Fitting and removing the baking trays").
3.
Apply a thin layer of vegetable oil to the baking tray. This will prevent sticking and cleaning after use
will be easier.
4.
Plug the power cord into a socket.
5.
The appliance will start to heat up. The 'on/off' indicator light will illuminate to show that the
appliance is on.
6.
The 'ready to use' indicator light will illuminate when the appliance has reached the temperature.
Open the appliance and place the food inside. Then close the appliance. It is recommended that the
24
DO1090C
3
5
4

Publicité

Table des Matières
loading

Table des Matières