Table des Matières
Publicité
Operation
Note:
Always work with the filter bag inserted.
Caution
Before inserting the mains plug, ensure that
the strut is located in a vertical position. The
appliance is switched off in this position.
Illustration
Turn the upper cable hook and remove
the mains cable. Insert the mains plug into
a socket.
Illustration
Press hold down the unlocking key. Pull
the shaft in the rear direction. The device
is activated.
To stop the appliance, bring the strut back
to the vertical position until it locks.
Complete care
It is recommended to perform the complete
care 2 to 3 times per year.
Remove the dirt from the floor
Sweep, vacuum or wipe the floor or floor
covering with a moist rag if necessary.
Applying care products
Use a mop to distribute the care product
evenly on the floor. Let dry completely
Notes: Please observe the instructions for
use of the flooring and care product man-
ufacturers!
Do not use care products containing solvents.
Polishing
Illustration
Drive across the surface multiple times as
shown in the illustration until the desired
shine is achieved.
Always move the appliance while it is run-
ning. Do not stay in one place for extend-
ed periods, because this could cause
damages to the flooring.
Note: Observe the manufacturer's in-
structions regarding when to walk on the
floor or move furniture, etc. We recom-
mend waiting at least 12 hours. During
this period, only walk on the surface care-
fully and not in street shoes. Do not move
any furniture and do not apply water to the
floor.
10 English
10
English
Maintenance care
We recommend performing the maintenance
care procedures once per month to achieve
an evenly distributed shine.
Depending on the manufacturer, the care
product can be poured directly into the
cleaning water. Please observe the in-
structions for use of the flooring and care
product manufacturers!
Then polish the surface.
Intermediate care
Depending on the requirements and the
use of the floor (foot marks, streaks...), the
care coat can be polished multiple times
without the need of applying new care
products to the floor.
Finish operation
Bring the strut back to a vertical position.
Appliance switches off.
Illustration
Remove the mains plug and wrap it
around the hook provided at the strut.
First turn the upper cable hook upwards.
Transporting the appliance
Ensure that the appliance moves on the trans-
port wheels while transporting it from one
room to another or moving it to its storage lo-
cation.
Illustration
For this, press handle backwards and pull
the appliance.
Storing the Appliance
We recommend activating the transport lock if
the appliance will not be used for extended
period of time.
Illustration
Place the appliance on the floor so that
the polishing head is positioned perpen-
dicular to the surface.
Remove the pad holder from the appli-
ance and place it into the storage com-
partment.
Press the transport lock into the intake of
the pad holder on one side and hold it
there. Firmly press the other side of the
Publicité
Table des Matières
