Beurer BY 84 Mode D'emploi page 24

• If the transmitter is not transmitting any
sound, the symbol 'baby is asleep' appears
and the backlighting automatically switches
to energy saving mode.
• If the transmitter is transmitting sounds, the
symbols for 'baby is awake' appear and the
backlighting automatically switches on.
• If the connection between the two devices
is cut off, an acoustic signal sounds on the
receiver and the symbol for range control
appears.
Note
Using the optical noise level monitor in the
child's room, the device can also be used by
those with hearing impairments or the deaf.
You can attach the devices to your belt using
the belt clip or hang them on the wall using suit-
able fixing materials.
Notes for the ECO mode
With Eco mode you can minimise the radiation
+
between the baby and parent units when the
baby is quiet. This ensures the safety of your
baby as there is no exposure to any unnec-
essary radiation. The device automatically
switches to Eco mode, as soon as no noise is
+
being transmitted.
Settings
Noise sensitivity (Baby unit)
Push the switch for microphone sensitiv-
ity ('Sensitivity') up or down in order to set
the desired noise sensitivity. If you have it set
to high sensitivity, the baby unit transmits all
noises.
Volume (Parent unit)
Push the volume control ('Volume') up or down
in order to increase or reduce the receiver vol-
ume on the parent unit.
Note
There is no noise transmission if you turn the
volume control all the way down.
Useful information about the baby monitor
• Position the receiver and transmitter upright in
order to ensure optimal transmission quality.
• Battery operation of the baby monitor mini-
mises electrosmog from electrical and mag-
netic alternating fields.
• You can increase the range of the baby moni-
tor by positioning the baby unit as high up as
possible near a door or window and ensuring
that the batteries are not too weak.
24