Service And Repairs - Leister GROOVER Instructions D'utilisation

Maintenance
• After use, disconnect the tool from the power supply. Remove the cutting blade cover (14). Clean the cutting
blade, cutter housing and dustbag (17). Refit the cutting blade cover (14).

Service and Repairs

• The carbon brushes of the tool's motor should be checked after about 1600 hours running time by your Service
Centre.
• Repairs have to be carried out by authorised Leister Service Centres only. They guarantee a specialized and
reliable repair service within 24 hours using original Leister spare parts.
Warranty
• For this tool, we generally provide a warranty of one (1) year from the date of purchase (verified by invoice or
delivery document). Damage that has occurred will be corrected by replacement or repair.
• Additional claims shall be excluded, subject to statutory regulations.
• Damage caused by normal wear, overloading or improper handling is excluded from the guarantee.
• Guarantee claims will be rejected for tools that have been altered or changed by the purchaser.
Conformity
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswi/Switzerland confirms that this product, in the ver-
sion as brought into circulation through us, fulfils the requirements of the following EC directives.
Directives:
Harmonized Standards:
Kaegiswil, 16.02.2012
Disposal
Power tools, accessories and packaging should be sorted for environmental-friendly recycling. Only for EC
countries: Do not dispose of power tools into household waste! According to the European Directive
2002/96 on waste electrical and electronic equipment and its incorporation into national law,
power tools that are no longer suitable for use must be separately collected and sent for recovery
in an environmental-friendly manner.
14
2006/42, 2004/108, 2006/95
EN 12100-1, EN 12100-2, EN 60204-1, EN 14121-1
EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3, EN 50366, EN 62233,
EN 60745-1
Bruno von Wyl, CTO Beat Mettler, COO