Operating Condition - Leister GROOVER Instructions D'utilisation

Description of tool
16
17
10
1. Power supply cord
2. Operating switch
3. Locking button of operating
switch
4. Cutting speed switch
5. Handle
6 Hand rest
7. Scale for depth adjustment

Operating condition

• Adjust the tracking wheel (11) with spacers (12) to the pitch as required when using nap-rolls, or tiles.
• Fit the ejector pipe (16) and dustbag (17).
• Adjust the groove depth.
– With your left hand push down the handle (5) of the drive unit up to the magnet stop.
– With your right hand on the control knob (8) adjust the required groove depth until approx. 3/4 of the
material thickness is visible on the scale.
• Caution: Cutting blade can protude!
• Align the tool along the grooving line via the adjustable guide roller (9) and the red positioning arrows (22).
Pay attention to the direction of cutting!
12
6
22
14
18
8. Control knob for depth adjustment
9. Adjustable guide roller
10. Rear roller
11. Tracking wheel
12. Spacers
13. Roller axle
14. Cutting blade cover
15. Threaded connection
5
8
4
15
22
3
2
19
1
7
20
16. Ejector pipe
17. Dustbag
18. Air inlet openings
19. Motor housing
20. Adjustment screw for
guide roller
21. Locking screw
22. Positioning arrows
12 11 13
9 21