Denios Secu EX Mode D'emploi page 66

Turner
Operation
WARNING
Crushing by falling drum.
The tension is released as soon as the ratchet is released. Risk of injury to workers and damage to property.
Only loosen the ratchet when the drum is standing fully flat on a firm surface
g
Ü
How to release the belt
Turning drums
Fig. 48: 360° gear
1 Gear
2 Drive wheel
Ü
How to turn the drum
66 / 144
1
2
1. Pull the ratchet safety lock and fold out the ratchet to
about 180°
2. Carefully pull the belt out from the slotted shaft and re-
move it from the drum
The drum has been set down and is released from the equip-
þ
ment.
ü The drum is lifted as described [} 6
The brakes are applied.
ü
1. Lift the drum to the required height
2. Turn the drive wheel (2) until the drum reaches the required
angle
3. To set the drum down, return it to the starting position
4].
241109_Secu-Ex_004_INT