Denios Secu EX Mode D'emploi page 63

WARNING
Crushing by falling drum.
Loose lock washer or adjusting screw can cause damage and injuries.
Only loosen lock washers and adjusting screws when the drum is standing fully flat on a firm surface
g
Ü
How to lift a drum with the clamp
Fig. 42: Clamp index
241109_Secu-Ex_004_INT
ü Observe the Safety instructions for daily use [} 5
1. Lift the clamp to just (approx. 5 mm) under the upper rim of
the drum
2. Position the drum lifter centrally in front of the drum
w Drum gripper jaws (1) are just (approx. 5 mm) under
the upper rim of the drum.
3. Lift [} 5 7] until the drum gripper jaws press under the
upper rim of the drum
4. Unscrew the adjusting screws (3) evenly as far as possible
(clamp index)
5. Tighten the lock washers (4)
6. Apply both brakes [} 5 7]
7. Lift the attachment, until the drum lifts
The drum is lifted (max. 30 cm above the floor). The brakes
þ
may be released and the drum moved to its destination.
Clamp
Operation
5]!
[} 5 7]
63 / 144