Permanently Saving The Additional Weight (Pt) - Seca 677 Mode D'emploi Et Garantie

Permanently saving the
additional weight (Pt)
2
Using the Pre-tare function, you can permanently save
an additional weight and automatically deduct it from a
measurement result. For example, you can save an all-
inclusive weight for shoes and clothing and then always
deduct this from the measurement result if a patient is
weighed fully-clothed.
The device has three memories for weights. You can
save various weights and call them up individually
depending on the initial situation, so that they are auto-
matically deducted from the measurement result.
1. Select the item "Pt" from the menu.
The message "Pt" appears.
2. Confirm your selection.
The last memory used is displayed.
3. You can adopt the memory displayed or select a
PT
different memory.
4. Confirm your selection.
Arrows flash in the display.
The additional weight saved to the selected
memory is displayed.
5. You can adopt the saved value or amend it using
the arrow keys.
NOTE
When you enter the value "0", the function is
switched off. The message "Pt" is no longer
displayed.
6. Confirm your selection.
7. Ask the patient to position him or herself on the
scale.
The patient's weight is displayed.
The saved additional weight has been deducted
automatically.
8. To deactivate the function, select the item "Pt" from
the menu again.
9. Confirm your selection.
The function is deactivated.
You exit the menu automatically.
NOTE
When you switch the scale off, the function is
switched off. The message "Pt" is no longer
displayed when you switch the scale on again.
Before you really get started ... • 77
English