Washer Connections For Portable Model - LG WF-T8500TP Manuel Du Propriétaire

18
W
asher Connections for Portable Model
One-Faucet Connections
Use the Complete hose provided with the water for a one-faucet connection.
Make sure the temperature selector is set at cold
1
Remove the complete hose from
inside the washer
Clamp
Water
Supply Hose
[ Complete Hose ]
2
Tighten water filter
Tighten the water filter to the faucet.
Water Filter
3
Connect to water supply
Attach the faucet connector to the faucet
adapter by pulling down on the locking
collar while lifting up on the connector until
it snaps into place. Make sure the water
filter provided is in place.
Locking
Collar
Faucet Connector
Water Filter
Drain hose
Faucet
Faucet Connector
4
Connect to valve inlet
Attach the water supply hose to the cold water
valve inlet (BLUE color).
Make sure the washer is inside the complete
hose before tightening.
Tighten the hose, ensuring the threads are
aligned properly for tightest fit. Inspect for
kinks or binding of the hose.
5
Connect drain hose
Attach the drain hose to the rear of the washer.
Install the clamp on the drain hose and tighten
to prevent leakage of water.