LG WF-T8500TP Manuel Du Propriétaire page 23

T
roubleshooting
WASH PROBLEM
Problem
The laundry
isn't clean
Pilling
Grayed or
yellowed
clothes
Washer makes
Noise
Possible Causes
Water temperature
is too cold.
Water temperature
is not correct
Stain is not
pretreated
Washer is
overloaded
Incorrect sorting
Insufficient
detergent
Result of normal
wear on poly-
cotton blends and
fuzzy fabrics
Not enough
detergent
Water is not hot
enough
Washer is
overloaded
Dye transfer
Gulping sound
after drain and
before spin.
Load is unbalanced
Washer is not level
Floor not strong
enough to support
washer
What To Do
• Use warmer water temperature
• Select the wash temperature according to soil type.
For example, blood and mud are better in cold water,
while oily soils are better in warmer water.
• Brush a little detergent dissolved in water or liquid
detergent or suitable prewash product onto stains,
collars, and cuffs to help shift dirt.
• Wash stains as soon as possible. The longer they are
left the harder to be removed.
• Select load size to match clothes load.
• White clothes are better washed separately. Separate
light and heavily soiled items, as clothes can pick up
soil from dirty washed water.
• Various size of load mixture is recommanded
(e.g. full loads of sheets may not wash that well).
• Detergent for load size or amount of soil is not
enough. Hard water requires more detergent
than soft water.
• While this is not caused by the washer, you
can slow the pilling process by washing
garments inside out.
Use more detergent (especially with larger loads).
Make sure water heater is delivering water at
120˚F.
Select load size to match clothes load.
Sort clothes by color. If fabric label states wash
separately, unstable dyes may be indicated.
This is normal.
Redistribute load
Level washer (Refer to p. 16.)
Relocate washer (Refer to p. 16.)
23