Hard Disk Info
To view the details about the USB disk, highlight Hard
Disk Info by using " " or " " key and press OK. USB
disk information will be displayed:
Configuring Date/Time Settings
Select Date/Time in the Settings menu to configure
Date/Time settings. Press OK button.
•
Use "
" or " " buttons to highlight Date/Time.
Date, Time, Time Settings Mode and Time Zone
Setting will be available.
Use " " or " " buttons to highlight the Time Settings
Mode. Time Settings Mode is set using " " or " "
buttons. It can be set to AUTO or MANUAL.
When AUTO is selected, Date/Time and Time Zone
options will not be available to be set. If MANUAL
option is selected as the Time Zone can be altered:
• By pressing " " or " " buttons select Time Zone.
Use " " or " " buttons to change the Time Zone
between GMT-12 or GMT+12. Date/Time on the top
of the menu list will then change according to the
selected Time Zone.
•
Changes are automatically stored. Press
to exit.
Configuring Source Settings
You can enables or disable selected source options.
The TV will not switch to the disabled source options
when "SOURCE" button is pressed.
•
Select
OK button.
•
Press"
•
Use "
" or " " button to enable or disable the selected
source. Changes are automatically stored.
Configuring Other Settings
To view general configuration preferences, select
Other Settings in the Settings menu and press OK
button.
"MENU"
Operation
•
Press "
•
Use "
•
Press
OK button to view a sub-menu.
- 69 -
Sources in the Settings menu and press
" or " " buttons to select a source.
" or " " buttons to select an item.
" or " " button to set an option.