Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Auto Channel Scan Menu Operation
Auto Channel Scan Menu Operation
Digital Aerial: Searches and stores aerial DVB
stations.
Digital Cable: Searches and stores cable DVB
stations.
Analogue: Searches and stores analogue stations.
Digital Aerial & Analogue: Searches and stores both
analogue and aerial DVB stations.
Digital Cable & Analogue: Searches and stores both
analogue and cable DVB stations.
•
Whenever you select an automatic search type and
press OK button, a confirmation screen will appear
on the screen. To start installation process, select
Yes, to cancel select No by using ." " or " " and
OK button.
After the auto channel scan type is set and selected
and confirmed, the installation process will start and
the progress bar will move along. Press "MENU"
button to cancel process. Located channels are not
stored if the process is cancelled.
Manual Tuning
HINT: This feature can be used for direct broadcast
entry.
Manual Channel Scan from the Installation
•
Select
menu by using " "/" " and OK buttons. Manual
Scan options screen will be displayed.
•
Select the desired
" button. Manual search options will change
accordingly. Use " "/" " button to highlight an item
and then press " " or " " button to set an option.
You can press "MENU" button to cancel.
Digital Aerial Manual Search
In manual channel scan, the number of the multiplex
or frequency are entered manually and only that
multiplex or frequency are searched for the channels.
After selecting search type as Digital Aerial, you can
enter the multiplex or frequency number using the
numeric buttons and press OK button to search.
Search Type using " " or "
Digital Cable Manual Search
In cable manual scan, you can enter frequency,
modulation, symbol rate and network channel scan
options. After selecting search type as Digital Cable,
you can set the desired options and press OK button
to search.
Analogue Manual Search
After selecting search type as analogue, you can use
" "/" " button to highlight an item and then press "
" or " " button to set an option.
Enter the channel number or frequency using the
numeric buttons. You can then press OK button
to search. When the channel is located, any new
channels that are not on the list will be stored.
Analogue Fine Tune
Analogue Fine Tune from the Installation
•
Select
menu by using " " or " " and OK buttons. The
analogue fine tune screen will be displayed. The
analogue Fine Tune feature will not be available if
there are no analogue channels, digital channels
and external sources stored.
•
Press
OK button to proceed. Use " " or " " button
to set Fine Tune. When finished, press OK button
again.
Network Channel Scan
Select Network Channel Scan from the installation
menu by using " " or " " and OK buttons. Network
Channel Scan selection screen will be displayed.
Select Digital Aerial or Digital Cable and press
OK button to continue. The following message will
be asked. Select Yes to continue or select No to
cancel.
- 56 -
Publicité
Chapitres
Table des Matières
