Manual Operation - S&P EMIDRY-DP Manuel D'installation Et D'utilisation

Comfort
* Only displayed when the appliance is executing a command sent via the home
automation network. In manual mode, standby is indicated by the absence of the
home automation signal.

8. MANUAL OPERATION

8.1 Connecting the appliance
Set the ON/OFF switch located on the rear of the control panel to ON (with the
red part showing).
8.2 Function select
Press the key to advance one position at a time through
DOMO and OFF.
Press again to return to
These positions correspond to the following appliance responses:
Appliance operating at the temperature setting shown on the display.
Appliance operating at temperature -3.5ºC below temp. indicated on the dis-
play:
Appliance off but with anti-freeze function activated (appliance switches on
when temperature descends to 5ºC, maintaining temperature between 5 and 9ºC.
Appliance executing command sent by infrared remote control.
Temperature setting
Infrared
Connected to home auto-
Comfort
mation network
Economy
Anti-freeze
Operation modes
and so on successively.
Clock (24-hour format)
The central dots blink
Room temperature
Day of week
These digits show clock,
day and temperature
information on a continuous and
rotating basis
Appliance heating up
Timer
Standby*
17
, , ,