Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
12. IN THE EVENT OF POWER OUTAGE
The appliance stops working and switches back on when the power is restored.
All settings are restored unchanged. Since the clock stops operating during
power outages, all clock settings will operate at a delay equivalent to the duration
of the outage until the clock is re-set to the correct time.
13. OVERHEATING PROTECTION
This appliance is designed to transmit heat by convection and radiation. It will be
unable to operate properly if covered - totally or partially - by clothes or other
objects. Covering the appliance can also cause it to overheat. However, the
appliance features a safety cut-off mechanism which switches it off in the event
of overheating. Once the cause of overheating has been removed, the appliance
resumes normal operation.
Overheating should be avoided as in addition to temporary disruption to settings
etc. repeated overheating may lead to malfunctions not covered by the guaran-
tee.
14. PERIODICAL MAINTENANCE
This appliance does not require any periodical maintenance. It need only be cle-
aned from time to time, using a vacuum cleaner fitted with a soft brush.
Alternatively, the appliance can be cleaned with a damp cloth. A pH-neutral soap
can be used for removing stains or blotches.
15. IN THE EVENT OF BREAKDOWN
- Check that the ON/OFF switch is set to ON (with the red part showing).- Check
that the appliance is switched on (ON).- Check that the appliance is receiving
power (LCD)- Check that the thermostat setting is above the ambient temperatu-
re.- If the appliance is in DOMO or
mode check that it is not programmed
to OFF.
If none of these checks resolves the problem, contact a technical assistance pro-
vider.
For any questions regarding S&P products, contact one of our After Sales offices
(Spain only) or your dealer (rest of world). To find your nearest S&P dealer, visit
our website at www.solerpalau.com
20
Publicité
Chapitres
Table des Matières
