SEKUR 200 Serie Notice D'utilisation page 13

Manufacturer, CE marking
EN 14387:04/A1:2008
expiring date, month (XX) and year (YYYY)
XX/YYYY
read the attached use and maintenance
4341.0687
accordance with the procedure foreseen
The complete filters SEKUR range with the CE marking is reference in the paragraph: "CE" that are present at the end of the
manual.
The products Declaration of Conformity is available on the web site www.dpisekur.com in the specific section.
manufacturer's identification (logo)
reference standard
for use with twin respirators only
of filter shelf life
handbook
filter code number
CE marking present on the filter label
which identifies the Notified Body
carrying out production control in
in Annex VIII (D module) of the EU
Regulation 2016/425.
Filter and packaging marking
Gas filters to be used only once
2
The additional marking "D" indicates compliance to
D
the clogging test with dolomite dust
The additional marking "R", i.e. reusable, proves
that, according to the newly introduced
requirement of EN 143:00/A1:2006, the particle
R
filter (alone or inserted in a combined filter) may
be used for more than a work shift after being
The additional marking "NR", i.e. not reusable,
proves that, according to the newly introduced
requirement of EN 143:00/A1:2006, the particle
NR
filter (alone or inserted in a combine filter) ought
not to be used for more than a work shift after
13
storage maximum humidity
storage temperature range
exposed to aerosol
being exposed to aerosol.