Saba SB49UHD19 Manuel D'utilisation page 79

Menu Operation
Move Step: Rotates the antenna in accordance with the step value. Enables the
antenna make a finer adjustment.
Store Position: Store current position as the selected positioner limit.
Goto Position: Rotates the antenna to the stored satellite position.
Goto Reference: Drive antenna to zero position.
Goto X: Moves the antenna to the location specified by the Set Location.
Set Limit: Press the green button to set Limits to the scope of satellite Antenna
rotation.
Move Continue: Rotates the antenna until the rotation has been completed or
Stopped manually.
Move Step: Rotates the antenna in accordance with the step value. Enables the
antenna make a fine adjustment.
Set West Limit: Set the West limit value.
Set East Limit: Set the East limit value.
Goto Reference: Drive antenna to zero position.
Disable Limit: Delete Limit settings. Allows the antenna to rotate over the full arc.
Cancel east limit and west limit.
Set Location: Press the yellow button to set Location.
Location: Longitude Direction, Longitude Angle, Latitude Direction, Latitude Angle
can be adjusted When the Location is set to Manual.
Longitude Direction: Sets the Longitude direction for the location.
Longitude Angle: Sets the Longitude angle for the location.
Latitude Direction: Sets the Latitude direction for the location.
Latitude Angle: Sets the Latitude angle for the location.
– Unicable: Select the single cable settings.
– Search: When you are satisfied with you setting, press
the OK/► button.
– Reset: Reset all Satellite Settings to the factory defaults.
• DTV Manual Tuning: Manual store for DVBS2 channels.
1. Press the ▲/▼ button to select the desired sub
item.
2. Press the arrow buttons to select the desired
value.
3. When setting is completed, select Search and
press the OK button to start channel tuning.
4. Press the EXIT (
NOTE:
 The satellite TV Company may adjust the transponder during the operation period;
therefore, the program parameter may be partially changed. The users who use this
machine to receive the satellite programs should regularly refer to the related
detailed information in this website: http://www.lyngsat.com/, and please add the
new transponder parameter in the machine in time, otherwise, your program
receiving may be influenced.
) button to exit.
Satellite
Frequency
Symbol
Polarization
Scan Mode
Service Type
19
DTV Manual Tuning
ASTRA 1H 1KR...v
DTV :
< 0 MHz >
Radio :
< 0 >
Data :
< Vertical Pos. >
< All >
< All >
Quality
Strength
Search
0 Programme(s)
0 Programme(s)
0 Programme(s)