Starting Operation - Bosch GLM 50-27 CG Professional Notice Originale

30 | English
Lithium-ion battery pack (accessory)
Inserting/changing the lithium-ion battery pack (accessory)
Insert the lithium-ion battery pack (19) (accessory).
To remove the lithium-ion battery pack (19) (accessory), press the locking
mechanism (20) and take the lithium-ion battery pack out. (see Fig. A, page 5)
Charging the lithium-ion battery pack (accessory)
For recharging, use a USB power supply unit whose technical data (voltage and char-
u
ging current) corresponds to that of the recommended power supply unit. Observe the
operating manual of the USB power supply unit.
Recommended power supply unit: See technical data.
Pay attention to the mains voltage. The voltage of the power source must match the
u
voltage specified on the rating plate of the power adaptor. Power adaptors marked
with 230 V can also be operated with 220 V.
Lithium-ion rechargeable batteries are supplied partially charged according to in-
ternational transport regulations. To ensure full rechargeable battery capacity, fully
charge the rechargeable battery before using your tool for the first time.
For more information, you can access the online operating instructions at
www.bosch-pt.com/manuals
Operation

Starting Operation

Never leave the measuring tool unattended when switched on, and ensure the
u
measuring tool is switched off after use. Others may be dazzled by the laser beam.
Protect the measuring tool from moisture and direct sunlight.
u
Do not expose the measuring tool to any extreme temperatures or variations in
u
temperature. For example, do not leave it in a car for extended periods of time. In case
of large variations in temperature, allow the measuring tool to adjust to the ambient
temperature before putting it into operation. The precision of the measuring tool may
be compromised if exposed to extreme temperatures or variations in temperature.
1 609 92A 7P9 | (07.06.2022) Bosch Power Tools