Open Window Detection; Locking System - S&P RADIANT-1505 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
5.6. ANTI-ICE mode
• This operating mode is extremely useful for when you're away from home (Example: holi-
day homes) and you don't want the temperature of the room to drop below + 5°C.
• Press
to activate the appliance. Then press
You'll notice that the thermostat has been automatically adjusted to a temperature (SET)
of + 5°C.
• When the temperature in the room drops below +5°C, the appliance will automatically turn
on at the maximum power (1,500 W) to avoid the water pipes from freezing, for example.
NOTE: The actual room temperature (ROOM) is indicated on the screen at all times.

5.7. OPEN WINDOW detection

• To avoid the heater working with the window open, the heater incorporates an energy sa-
ving control function. This function can only be activated when the heater is working in
MANUAL mode.
• Press
to activate this function. On the screen the corresponding (
to indicate that we have this control function activated.
• If the room temperature falls 5ºC in 10 minutes, the heater detects that we have a window /
door open and the heater will stop working for 60 minutes. On screen the open window icon
will fl ash to inform us that this function is active.
• If after the 60 minutes the temperature still hasn't risen at least 1ºC, the heater will stay
off for another 60 minutes, as it understands that the window / door is still open.
• If the room temperature has increased one degree with respect to the temperature at the
time of the stop, the heater will keep working in MANUAL MODE.
NOTA: En cualquier momento podemos desactivar la función, presionando de nuevo la tecla
.

5.8. LOCKING system

• This option is very useful for public places such as libraries, hotels, etc., where you don't
want anyone to be able to manipulate the appliance. By activating this feature, the heater
will work in MANUAL mode or AUTOMATIC mode and nobody will be able to manipulate
the controls.
Press (
) simultaneously for 5 seconds to activate/deactivate the heater's locking
system. When it's locked,
• Even if the heater is switched off by pressing the main switch or by unplugging the heater
from the electricity network, the locking system stays in place.
until (
will appear on the screen.
) comes up on the screen.
) icon will appear,
17

Publicité

Table des Matières
loading

Table des Matières