Exemple de fichier vca.conf
Voici un exemple de fichier vca.conf :
#
# Copyright 2002 Sun Microsystems, Inc.
# Use is subject to license terms.
#
#ident
"@(#)vca.conf
#
# Use the new Solaris 9 properties to ensure that the driver is attached
# on boot, to get us to register with KCL2. This also prevents us from
# being unloaded by the cleanup modunload -i 0.
#
ddi-forceattach=1 ddi-no-autodetach=1;
name="pci108e,3de8" parent="/pci@8,700000" unit-address="1" adv-autoneg-cap=0;
adv-autoneg-cap
=1;
1.2
06/02/26 SMI"
All rights reserved.
Chapitre 3 Configuration des paramètres du pilote
41