Environment Preservation; Installation Instructions - Wesco W-TPY38 Mode D'emploi Et D'installation

ENVIRONMENT PRESERVATION

• The materials of packaging are ecological and recyclable.
• The electronic appliances are composed of precious metals. Ask your commune for
recycling possibilities.
• Don't throw your appliance in the household refuse
• Get in touch with the waste collection centre of your
commune that is adapted to the recycling of
the household appliances.

INSTALLATION INSTRUCTIONS

The installation is the exclusive responsibility of specialists.
The user of this appliance is held to respect the legislation and the standards enforced in his
home country.
How to stick the gasket:
Fitting - installing:
• The dimensions are:
Cut size
Type Width
W-TPY38 360
• Ensure that there is a distance of 50 mm between the hob and the wall or sides.
• The hobs are classified as "Y" class for heat protection. Ideally the hob should be installed
with plenty of space on either side. There may be a wall at the rear and tall units or a wall
at one side. On the other side, however, no unit or device can be higher than the
hob.
• The piece of furniture or the support in which the hob is to be fitted, as well as the edges of
furniture, the laminate coatings and the glue used to fix them, must be able to resist
temperatures of up to 100 °C.
• The mural rods of edge must be heat-resisting.
• Do not install the hob to the top of a non- ventilated oven or a dishwasher.
• To ensure good air circulation of the electronic device, maintain a space of 20 mm under
the bottom of the hob casing.
• If a drawer is placed under the work, avoid putting flammable objects in this drawer
(for example: sprays) or non-heat-resistant objects.
Flush mounting
Depth Width Depth
490
386 526
Stick the gasket (2) two millimetres
from the external edge of the glass,
after removing the protection sheet (3).
Radius Width
8 380
31
Glass size
Depth Thickness
520 6