Stop&Go Function; Recall Function; Bridge Function; Control Panel Locking - Wesco W-TPY38 Mode D'emploi Et D'installation

Stop&Go function
This function brakes all the hob's cooking activity temporarily and allows restarting with the same
settings.
•
Start up/stop the stop&go function:
Action
Engage stop&go
Stop the stop&go

Recall Function

After switching off the hob [
• cooking stages of all cooking zones (Booster)
• minutes and seconds of programmed cooking zone-related timers
The recall procedure is the following:
• Press the key [
• Then press [ II ] before the light stops blinking.
The previous settings are activated again.

Bridge Function

This function allows the use of 2 cooking zones at the same with the same features as a single
cooking zone. Booster function is not allowed.
Action
Activate the hob
Activate the bridge
Increase bridge
Stop bridge

Control panel locking

To avoid modification of the setting of the cooking zones , particularly when cleaning, the control
panel can be locked (with exception to the On/Off key [
Action
Lock the hob
Unlock the hob
Control panel
Press [ II ]
Press [ II ]
Press on the animated "slider"
], it is possible to recall the last settings.
]
Control panel
Press display [
Press simultaneously on [
of the 2 cooking zones
Slide on the "SLIDER"
which indicates the power
Press simultaneously on [
of the 2 cooking zones
Control panel
Press [ ] during 6s
Press [ ] during 6s
27
]
]
]
]).
Display
[ II ] and control light on
"Slider" animated
previous settings
Display
[ 0 ]
[ 0 ] and [ ]
[ 1 ] to [ 9 ]
[ 0 ]
Display
lock light on
lock light off