B.7 Maintenance Schedules - GMV GL MRL-MC Manuel D'entretien

B.7 MAINTENANCE SCHEDULES

I. Group : GL 81 21 devices
What to do:
I.a Car stop electrical device
- Check that the switches on guide rails, correctly work, are well tights and in the correct position
I.b Car stop mechanical device
- Verify that the mechanical device correctly work
- Verify that the rope slides easily into the guide and if necessary lubricate it.
- Check that the safety switches of the device correctly work
I.c Remote landing door unlock device
- Verify that the balustrade correctly works.
- Verify that all the joints between the parts correctly work.
- Make sure that the safety switch correctly works.
I.d Remote control station
- Check, for safety, that the apron correctly work.
I.e Remote hand pump
- Verify that the electrical safety switch correctly work
· Change or restore all components that don't work properly.
¥
"
Maintenance Manual
Procedures for GL 81 21 lift
Pag. 5 di 6
B
Doc. n° 10991032
Rev.1.0.11 - 07.06.2006
EN
7