KPS MT40 Manuel D'instructions page 25

KPS-MT40 • Digital multimeter
• When the battery indicator
mediately. Low battery will cause meter reading errors, and possibly result
in electric shock or personal injury.
• When the meter shell (or part of shell) is removed, do not use the meter.
• 1.1.3 Safety symbols
Symbols used on the meter surface and instructions:
Important safety information. Refer to the instructions before
use. Misuse can result in equipment or its components dama-
ge.
AC (Alternating Current)
DC (Direct Current)
AC or DC
Ground
Double insulation protection
Fuse
European Union Directive
1.1.4 Safe maintenance habits
• Remove test leads from the Meter before opening the Meter case or battery
cover.
• When servicing the Meter, use only specified replacement parts.
• Before opening up the instrument, always disconnect from all sources of
electric current and make sure you are not charged with static electricity,
which may destroy internal components.
• Any adjustment, maintenance or repair work carried out on the meter while
it is live should be carried out only by appropriately qualified personnel, after
having taken into account the instructions in this present manual.
• A "qualified person" is someone who is familiar with the installation, cons-
truction and operation of the equipment and the hazards involved. He is
trained and authorized to energize and de-energize circuits and equipment
appears, the battery should be replaced im-
25