Removal Of Seat And Cover - Roca In-Wash In-Tank A803094001 Mode D'emploi

❚

4.7 REMOVAL OF SEAT AND COVER

To remove the seat and cover, slide the internal side tab upwards and carry out the movement described in the image; raise the side of the turned tab and
slide it sideways towards the opposite side.
4
To replace the seat and cover carry out the operation in reverse.
Important warning:
If you remove the dampers when extracting
the seat and cover, it is important to take into
account their position, as a change in their
position may seriously damage the product.
The white damper is located on the right side
(to cushion the seat) and the grey one is on
the left (to cushion the cover).
1
Gray
Gris
L
3
2
6
5
Blanco White
R
25