Maintenance And Storage - IWatMotion iWatBike iRider Mode D'emploi

MAINTENANCE AND STORAGE

1. Please keep your bike out of direct sunlight and rain.
2. Regularly check the screws and small parts on the bike and tighten them when needed.
3. Do not use alcohol, gasoline, paraffin, acetone or other corrosive chemical solvents for cleaning as this
may corrode the bike.
REGULAR MAINTENANCE AND TESTING SUGGESTIONS
Part to Maintain Reason to Maintain
Check the brake function in order to prevent accidents caused by brake
Brake
malfunctions.
Check both tire-condition and pressure, in case a tire bursts or over-consumption
Tire
during riding.
Check the conditions of the rim, clean off any dirt, in case the rim breaks or gets
Tire Rim
stuck.
Check the condition of the shock-absorber, clean and lubricate in order to maintain
Shock-absorber
the unit in good condition.
Throttle Check the condition of the throttle, in case of malfunction.
Wires Check if the wire ports are loose or broken, in case of faulty wiring.
Screws Check the screws on the main parts of the bike, in case they become loose or fall off.
Check the appearance and performance of the battery, in case of faulty wiring in
Battery
order to extend the lifespan of the battery.
Charger Check if the charger cord is intact and that the input and output plugs are reliable.
Lubrication Check the if axles and brakes require lubrication.
Cleaning Keep the surface of the bike clean and in good condition.
TIP: Please maintain and check the bike regularly in order to keep it in the best possible condition.
39
electric
BIKE