IWatMotion iWatBike iRider Mode D'emploi page 29

4. INSTALLING THE SEAT POST
1. Release the seat post clamp, then hold the frame
to insert the seat.
5. ADJUSTING THE SADDLE HEIGHT
1. Loosen the seat post clamp, place the saddle at a
suitable height and then tighten the clamp.
2. Tighten the seat post clamp as shown. Then,
press down on the seat to ensure it's firmly in
place.
2. Make sure that the seat post clamp is within the
limit screw and the max height line, otherwise ri-
ding can be dangerous.
29
electric
BIKE
Limit Screw
Max Height
Indicator