Operations; Button Operation; Screen Description - INFOSEC M5T Manuel Utilisateur

3. Operations

3-1. Button Operation

1) Before operation, make sure that the two strings of batteries are connected correctly in
order of "+,GND,-" terminals and the breaker of the battery pack is at "ON" position
(only for long-run model).
2) Press the "
into power on mode. After initialization, UPS will enter into "No Output mode".

3-2. Screen Description

After initialization, the LCD will display main screen. There are five sub-menus: Control,
measure, setting, information and data log. Touch any sub-menu icon to enter into the
sub-screen.
Initializing MAIN
INFOSEC UPS SYSTEM – 15, rue du Moulin – 44880 Sautron, France – www.infosec-ups.com
100
Hotline : +33 (0)2 40 76 15 82 – Fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 02 22 AA 59 203 08
" button to set up the power supply for the UPS. UPS will enter
ON/OFF UPS
BATTERY TEST
MUTE ALL
CONTROL ON/OFF CHARGER
MEASURE1
MEASURE2
MEASURE MEASURE3
GENERAL
ADVANCE
SAVE
SETTING
SETTING
BASIC INFO
RATED INFO
INFO PARAMETER INFO
DATA LOG
BASIC1
BASIC2
PASSWORD:0000
User
PASSWORD:****
Maintainer
Menu tree
ELECTRICAL
BATTERY
MISCELLANEOUS
SYS PARAMETER
INSTALL INFO
VOL CALI
CURR CALI
INITIAL DATALOG
ELECTRICAL
PARAMETERS
BATTERY CALIBRATION
MISCELLANEOUS EEPROM
UPS SELFTEST TOUCH