Stop Switch; Cutting Attachment Guard - Jonsered GC2128 Manuel D'utilisation

SAFETY INSTRUCTIONS
Make sure the throttle control is locked at
the idle setting when the throttle lock- -out is
released.
Press the throttle lock- -out and make sure it
returns to its original position when you re-
lease it.
Check that the throttle control and throttle
lock- -out move freely and that the return
springs work properly.
See instructions under the heading Start.
Start the machine and apply full throttle.
Release the throttle and check that the
cutting attachment stops and remains at a
standstill. If the cutting attachment rotates
with the throttle in the idle position then the
carburettor idle setting must be checked.
See instructions under the heading
Maintenance.
545186856 Rev. 8 5/15/12

Stop switch

Make sure the engine stops when you push
and hold the stop switch.

Cutting attachment guard

This guard is intended to prevent loose ob-
jects from being thrown towards the opera-
tor. The guard also protects the operator
from accidental contact with the cutting at-
tachment.
Check that the guard is undamaged and not
cracked. Replace the guard if it has been
exposed to impact or is cracked.
Always use the recommended guard for the
cutting attachment you are using. See the
"Technical data" section.
WARNING:
Never use a cutting
attachment without an approved
guard. See the section on "Technical
data". If an incorrect or faulty guard
is fitted this can cause serious
personal injury.
Use of incorrectly wound trimmer line or an
incorrect cutting attachment increases the
level of vibration.
WARNING:
Overexposure to
vibration can lead to circulatory
damage or nerve damage in people
who have impaired circulation.
Contact your doctor if you experi-
ence symptoms of overexposure to
vibration. Such symptoms include
numbness, loss of feeling, tingling,
pricking, pain, loss of strength,
changes in skin color or condition.
These symptoms normally appear
in the fingers, hands or wrists. The
risk increases at low temperatures.
English--- 5