Publicité
1
Unpacking and Setting Up the Planar 6 and Neo Power Supply
2
Setup and Connections
2
Connection to the Amplifier
2
Cartridge Mounting and Setting Up the RB330 Tonearm
2
Speed Adjustment
3
Adjusting the Speed
3
Returning the Neo to Factory Settings
3
Use of Mobile Phone Apps to Check and Adjust the Speed
3
Rega Strobe and Stroboscopic Disc
3
Using the Strobe Kit
4
Safety and Warranty
4
Neo Specifications
4
Warnings
Thank you for purchasing this Rega product.
Please follow this quick set up guide to ensure optimum performance and perfect operation. Failure to do so may invalidate your warranty. For more
information on this product, please visit www.rega.co.uk.
Unpacking and Setting Up the Planar 6 and Neo Power Supply
•
Always keep the turntable flat.
•
Follow the unpacking guide printed inside the front of the box.
•
Save the packaging in case you need to transport your turntable in the future.
•
Place the turntable on a rigid level surface.
•
Ensure the drive belt is in place and remove the transport hub card from beneath the sub platter.
•
Carefully place the glass platter on the hub and fit the turntable mat.
6
1
7
2
5
4
1.
Platter
2.
Drive Belt & Pulley
3.
Tonearm
4.
Balance Weight
5.
Plinth
6.
Power Input
7.
Phono Output
3
8.
Finger Lift
8
1
Publicité
