Safety Information; Layout; Proper Use - EINHELL BG-PW 48 Mode D'emploi D'origine

Anleitung_BG_PW_48_SPK1:_
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.

1. Safety information

Please refer to the booklet included in delivery for the
safety instructions.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
2. Layout (Fig. 1/4)
1 Tank cover
2 Refilling nozzle with screw
3 Pressure connection
4 Oil filler plug
5 Oil drain plug
6 ON/OFF switch
7 Reversing starter
8 Petrol cock
9 Choke lever
10 Throttle control
11 Suction connection
12 Water emptying plug
13 2x Threaded connector 1" external thread
14 2x Threaded connector 1.25" external thread
15 2x Hose connector 2"
16 3x Hose clip
17 2x Seal
18 2x Union nut
19 Intake cage
20 Spark plug wrench
21 Oil filler funnel
10.08.2011 10:00 Uhr Seite 13

3. Proper use

The machine is suitable for irrigating and watering
landscaped areas, vegetable beds and gardens and
for operating lawn sprinklers.
The water can be taken from ponds, streams,
rainwater butts, rainwater cisterns and springs if an
initial filter is fitted.
The maximum temperature of the fluid must not
exceed +35°C if the machine is operated
permanently.
Clean water (sweet water), rainwater and low
concentrations of washing lye can be used as the
transport medium. The machine must not be used to
transport inflammable, gassing, explosive and
aggressive fluids (such as petrol, acids, lyes, silo
percolating juice, etc.) and fluids that contain
abrasive substances (such as sand).
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
GB
13