Micro-Star International B85M-E45 Mode D'emploi page 43

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

DRAM Training Configuration
Press <Enter> to enter the sub-menu. Enables or disables the various training ways of
DRAM. The system may become unstable or unbootable after changing these items
in this sub-menu. If it occurs, please clear the CMOS data and restore the default
settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data,
and enter the BIOS to load the default settings.)
Memory Fast Boot [Auto]
Enables or disables the initiation and training for memory every booting.
[Auto]
This setting will be configured automatically by BIOS.
[Enabled]
Memory will completely imitate the archive of first initiation and first
training. After that, the memory will not be initialed and trained when
booting to accelerate the system booting time.
[Disabled]
The memory will be initialed and trained every booting.
VCCIN Voltage [Auto]
Sets the CPU input voltage. The CPU input voltage is the CPU power source that is
shared with components of the CPU.
Current VCCIN Voltage
Shows current CPU VCCIN voltage. Read-only.
CPU Core Voltage Mode
Selects the control modes for CPU Core voltage.
[Auto]
This setting will be configured automatically by BIOS.
[Adaptive Mode]
Sets adaptive voltage automatically for optimizing the system
performance.
[Override Mode]
Allows you to set this voltages manually.
CPU Core Voltage [Auto]
Sets CPU core voltage. If set to "Auto", BIOS will set the voltages automatically or
you can set it manually.
Current CPU Core Voltage
Shows the current CPU core voltage. Read-only.
DRAM Voltage [Auto]
Sets the memory voltage. If set to "Auto", BIOS will set memory voltage automatically
or you can set it manually.
Current DRAM Voltage
Shows current memory voltage. Read only.
CPU Memory Changed Detect [Enabled]
Enables or disables the system to issue a warning message during boot when the
CPU or memory has been replaced.
[Enabled]
The system will issue a warning message during boot and than needs
to load the default settings for new devices.
[Disabled]
Disables this function and keeps the current BIOS settings.
En-31

Publicité

Table des Matières
loading

Table des Matières