Recordings - Berger 359830 Manuel D'utilisation

GB
Scan lock
With scan lock „On", no search (neither automatic search nor manual search) can be perfor-
med.
Input lock
Input sources defined by you can be locked with this. You can use this, for example, to prevent
input sources from being used on the HDMI or AV inputs. You can also prevent antenna, cable
or SAT programmes from being used.
Default source
When you switch on the television, it automatically switches to the default source you have
entered (e.g. Sat). If a source is specified, for antenna, cable or satellite you can also select the
channel type (DTV, radio, DATA) and the default channel (a programme you specify here) from
the channel list.
Maximum volume
This setting allows you to limit the maximum volume of the television.
Default volume
This sets the default switch-on volume.
Import
Previously exported TV settings can be imported from an external USB storage device.
Export
The TV settings can be copied to an external USB storage device.
Language
Here you can set the menu language in which all OSD screens are displayed. This can also be set
in the settings in the „Smart Menu" (see Chapter 14).

11. recordings

PVR recording
You can record programmes onto an external USB memory (hard disk or memory stick) plugged
into one of the two USB ports on the TV.
Note:
Please note here that not all USB sticks or external hard disks are compatible. Problems can oc-
cur especially with USB 3.0 storage media. Given the large number of models and memory sizes
available, we cannot guarantee that all USB memory devices on the market will function pro-
perly. Important for the function is above all a read/write speed of the storage media of more
54
than 5 MB/s, for HD recordings even higher. External hard disks should preferably be plugged
into the USB input, which can output up to 500 mA current to operate the hard disk.
You can programme the recording as a timer recording in the EPG menu or as an instant recor-
ding by pressing the button with the red dot on the remote control.
For recordings via the EPG menu, press the red key (recording) in the EPG menu to start the PVR
mode. A submenu is called up in which you can select the recording settings consisting of the
channel to be recorded (programme position) and the recording time (start time and end time)
as well as enter whether the recording is to be made „once a day", „weekly", „daily", „every
Mon-Fri" or „every Mon-Sat".
The recordings are saved on an external USB
storage medium in a proprietary format in
the folder „pvr". The files cannot be opened
or viewed via this. To play back a recording,
select the FUNCTION menu in TV mode via the
MENU key and there the item „PVR list" and
confirm with OK.
A screen with the recordings appears. There
you select the desired film. You can start it
with OK and delete it with the red key.
To start Timeshift, press the key with the red
dot on the remote control and then press the „OK" key. Timeshift is controlled via the function
keys displayed in the TV picture.
In addition to the function keys for pausing/starting and fast forwarding/rewinding, the bar also
shows you the programme being recorded and the fill level of the connected storage medium
in %.
If you have inserted a storage medium at both
USB connections, you can select the desired
storage medium in the FUNCTION menu under
the item PVR option, format it and carry out a
speed test.
GB
55