Edit Channel - Berger 359830 Manuel D'utilisation

GB

9.4 Edit Channel

To edit the programmes, press MENU, select the Programme menu and then „Edit program-
mes".
Use the / buttons to select a programme you
want to delete, then press the red button to
delete the programme from the list.
If you want to move a programme in the list
to another programme storage location, select
this programme with the / keys and then press
the yellow key to mark the programme for mo-
ving. Then use the / keys to move the program-
me to the desired new position and confirm
this with the „OK" key.
Press the blue key to mark a programme that
you do not want to select in the future when
you press the CH+/- key, but which you want
to skip.
Press the FAV key to add the channel to your
favourites list.
9.5 Edit Satellites
Use the / keys to select the „Satellite Settings"
item in the Channel menu if you want to view
or change the satellite configuration.
The list of saved satellites appears (on the left
of the screen) and you can see the parameters
of the selected satellite after selecting it on the
right of the screen.
Select the desired satellite with the / buttons.
If you want to change data of the satellite (not
advisable!), you can enter this in this menu.
50
LNB Type: Indicates the type of LNB. Here you can select the intermediate frequencies of the
LNB. Default is 09750/10600.
22KHz: Select whether the 22KHz is sent to the LNB (Off, On, Auto).
Unicable: If the TV is operated on a multi-subscriber system with Unicable protocol, make
the appropriate settings here.
DISEqC1.0/1.1/1.2: If, for example, you are using a monoblock LNB with integrated
If, for example, you are using a monobloc LNB with an integrated multi-switch or if you are
operating the TV set on a multi-switch to which several LNBs for different satellites are con-
nected, you must specify here the number (LNB1, 2, 3 or 4) of this satellite in the multi-switch.
DISEqC 1.2 enables the motor control.
Motor: If you use a DiSEqC motor control, it can be switched on here. This has nothing to do
with the use of automatic antennas. With the „OK" key, you can select the type of motor
control „Standard" or „Nonstop" as well as limits in the east and west. For details, please refer
to your specific motor control.
If you want to change or add a transponder of the satellite, select the item „TransPonder"
in the satellite parameters and press „OK". A screen with the transponder list of the satellite
appears (left picture). There you also select the transponder with the / keys.
9.6 CI Information
In the PROGRAMME menu, select the menu
item „CI Information" with the / keys. This is
only enabled if there is a CI+ decoding module
in the CI+ slot of the TV set.
A window opens and shows the module. By
pressing OK, you can access the specific menu
of this module and, for example, update the
software of the module.
9.7 Signal Information
In the PROGRAMME menu, use the / keys to
select the menu item „Signal Information"
to read the signal strength and quality of the
received programme. This is useful, for examp-
le, for aligning manually adjustable satellite
antennas.
GB
51