Settings; Open The Dishwasher's Settings Menu - Atag VA8015NT Mode D'emploi

Settings

Open the dishwasher's Settings menu

To open the dishwasher's Settings menu, press the navigation button
your selection with the mode selector
To exit the dishwasher's Settings menu, select Exit and confirm your selection with the mode selector
Settings
1. Language
2. Child lock
3. Display
4. Sound
5. Rinse aid
6. Super rinse
12
.
Navigation button for selecting a setting
Mode selector to confirm current setting
2. Child lock
Settings
Options
English/Svenska/Dansk/Norsk/Suomi/
Nederlands/Français/Deutsch/Italiano/
Русский /Español/Português/Sloven./
Eesti/Latvie u/Lietuvi ų /Hrvatski/Polish/
简体中文 / 繁體中文 / 日本語
On/Off
Contrast 1/2/3/4
Prog. info screen T/S
Feedback 0/1/2/3
Volume 0/1/2/3
0/1/2/3/4/5/TAB
On/Off
until Settings menu is shown on the display and confirm
.
On
Current setting
You can choose the language used for the display.
You can activate the child lock (button lock) to prevent children
from starting the dishwasher.
To temporarily deactivate and activate the child lock, press and
hold the mode selector
for 3 seconds.
For adjusting the contrast of the display.
You can select which information is shown on the display.
T-Text (Text) S-Symbol (Symbol)
Rinse & hold 0:07
This sound is used to confirm each button press.
The buzzer indicates when a dishwashing programme has ended.
Error messages are always indicated by a loud buzzer.
Setting for rinse aid dosage. The rinse aid dispenser can be
adjusted between 0 (Off) and 5 (High dosage).
Increase the rinse aid dosage:
If the dishes have water marks.
Decrease the rinse aid dosage:
If the dishes have a sticky white/blue film.
If the dishes are streaked.
Build-up of foam. If you have very soft water, the rinse aid can
be diluted 50:50 with water.
When using an all-in-one detergent that contains rinse aid, you can
activate the setting TAB.
Super rinse adds two extra rinses.
Activated in the following programmes:
Daily
Intensive
and the option button for Delayed Start
0:07