Appliance Description; Before First Use - Inventum IVR1021S Mode D'emploi

2

appliance description

2
3
before the first use
After installation, leave the appliance for at least 3 hours before inserting the plug into the socket. The cooling circuit must
be stabilised, before the appliance is able to work efficiently.
Observe these instructions when using the appliance for the first time: carefully unpack the freezer and remove all
packaging material. Keep the packaging (plastic, polystyrene and cardboard) out of the reach of children. After unpacking
the machine, check it for external damage that may have occurred during transport. Place the appliance on a sturdy, flat
surface. Clean the appliance before using it for the first time; particularly the interior (see Cleaning & Maintenance).
The installation and electrical connection must be performed by a qualified technician, in accordance with the installation
instructions and local regulations.
How the appliance should be placed is described in the Installation Instruction.
The appliance must be connected to a properly installed earthed socket. The voltage (AC) should correspond with the
voltage stated on the information plate. The information plate is located on the left side wall in the appliance.
The appliance may emit a strange smell when switching it on for the first time. This will disappear once the appliance starts
to cool.
In order to prevent the condenser from making contact with the rear wall, you must rotate the plastic
distance guide by 90°.
In order to ensure a smooth and vibration-free operation of your freezer, the adjustable front feet must
be adjusted to a suitable height and mutually balanced. You can guarantee this by rotating the adjustable
feet clockwise or anti-clockwise. Do the following before placing food in the freezer.
Before you start using the freezer, you should wipe all components with warm soapy water with washing-up liquid, all-
purpose cleaner or soda, for example. Wipe the inside and components of the freezer after cleaning with clean water and
properly wipe everything dry. Leave the appliance to dry for 1 to 2 hours.
1
1. Control panel
2. Freezer drawers
3. Door
3
English
25
•