Appliance Description; Before The First Use - Inventum MV010S Mode D'emploi

2

appliance description

1. Crisper drawer
2. Glass shelves
3. Top panel
4. Thermostat with interior lighting
5. Door
6. Handle
7. Door compartments
8. Bottle compartment
9. Adjustable legs
3

before the first use

Before you use the appliance for the first time, please do as follows: Carefully unpack the appliance and remove all the
packaging material. Keep the material (plastic, polystyrene and cardboard) out of reach of children. Check the appliance
after unpacking for any damage, possible from transportation.
Place the appliance on a flat and stable surface. Make sure there is enough open space around the appliance for the intake
and/or outlet vents. A minimum clearance of 10 cm is required between the appliance and any adjacent walls and 30 cm for
the top side. The appliance needs good ventilation for easy dissipation of heat, high efficiency of refrigeration and low power
consumption.
Note: check the climat class of the appliance. When installing the appliance in a environment that is not suitable, the
appliance can not function properly.
Leave the appliance to stand for at least 4 hours before you insert the plug into the socket.
First clean the interior of the appliance. Use warm water and a neutral detergent. After cleaning, rinse the interior with clean
water and rub dry. Leave the appliance to dry for 1 to 2 hours.
Fix the handle to the door.
• Remove the 2 bolts where the handle should be.
• Fix the handle with the screws.
• Place the 2 plastic caps to cover the screws.
3
2
1
9
4 5
English
6
7
8
19
•