Reading Area Shot Data; Activating The Area Shot Mode - Eclipse CD3100 Manuel D'utilisation

Various Settings

Reading Area Shot data

The Area Shot data that has been downloaded
from E-iSERV (web site) to a CD-R can be
loaded into the main unit and saved there.
Press the [EQ/MENU] button for
1
more than one second.
The Menu Selection mode is activated.
Press the [SELECT] (Upper/ Lower)
2
button to select FUNCTION then
press the [ENTER] button.
The function mode is activated.
Press the [SELECT] (Upper/ Lower)
3
button to select the AREA SHOT.
4
Press the [ENTER] button.
The front panel opens automatically.
Insert the CD-R to be used for read
5
the Area Shot data.
If there are no correct files on the CD-
R, "NO DATA" is displayed.
Press the
6
Lower) button to select the saving
file.
7
Press the [ENTER] button.
The selected file will be saved.
"READING" is
reading has finished, [COMPLETED]
will appear on the display and then it
will return to the display for selecting
the function
appears if the system is unable to read
the file.
36
[SELECT] (Upper/
displayed. When
mode. [FILE ERR]
CAUTION
• Do not turn the ignition switch or power
to the main unit ON or OFF (or remove
the front panel of the main unit) while
data reading is in progress. Data
reading will be interrupted and data may
be damaged.
• Only the [ (OPEN/EJECT)] button
can be operated while the system is
reading data. Ejecting the CD-R stops
reading the data and the data will not be
saved in the main unit.

Activating the Area Shot mode

Press the [MUTE/Area Shot] button
1
for more than one second.
Intersection street names and turning
directions are displayed on the screen.
Pressing and holding the [MUTE/Area
Shot] button (for 1 second or more) a
second time closes the Area Shot
mode.
● Note ●
• Confirm the caution display and
press [ENTER] to turn ON the
Area Shot mode.
CAUTION
• Modes may not be changed if guidance
data has not been imported properly.
• Do not look at the screen while driving.