Display And Controls - OHAUS STARTER 3100M Manuel D'instruction

STARTER 3100M Bench Meter
1.3

Display and controls

Displays
1
1 pH Electrode condition
Slope: more than 95%
and offset: ± (0-15) mV
Electrode condition is good
2
Endpoint stability icon
3
Measurement icon -
4 Calibration icon -
5
Setup icon -
etc.
6 pH/mV reading, or slope of pH electrode calibration; or Conductivity/TDS/Salinity/Resistivity
value, or cell constant of conductivity electrode.
7
Calibration point
8 Auto temperature compensation - ATC ; Manual temperature compensation – MTC;
Conductivity reference temperature - R.Temp
9 Temperature value during measurement or offset (mV) value in pH calibration process.
2
1 2
8
7
or offset: ± (15-35) mV
Electrode condition is
acceptable
; Auto endpoint icon
; means measurement or calibration is running when blinks.
; means calibration in progress when display.
; instrument is in the setup mode, can set temperature(MTC), buffer group
/ Buffer group
3 4 5
3 4 5
Slope: 90-95%
/Memory number
6
9
Slope: less than 90%
or offset: ± (35-60) mV
Electrode condition is not
good or needs cleaning
.
.
/ Error index
EN 3
-