Siemens DELTA i-system Komfort 5TC1 Serie Notice De Montage Et De Service page 58

GB
4. Programming the Sun Protection Function:
Prog Zufall Astro
Uhrzeit
Datum
Confirm by depressing the
(If sun protection is deactivated, continue with 7: 'Programming the Twilight Function'.
Prog Zufall Astro
Uhrzeit
Datum
This setting can be changed with the the
Approximate sun protection brightness values
The following table shows some brightness values corresponding to the indicated figure
indicated
3
8
15
25
40
68
70
6. Confirm the setting by depressing the
58
Mo
Di
Mi
Do
Fr
Sa
So
key briefly.
Set
Mo
Di
Mi
Do
Fr
Sa
So
approx. value in lux
1500
4800
10000
21000
37000
74000
76000
Sun protection and twilight function
Use the or
the sun protection function.
flashing:
continuously on: the sun protection function is
5. When the sun protection function is activated,
the two figures on the left indicate the current
brightness.
The two figures on the right are flashing and
represent the preset brightness below which
the blind/shutter is lowered.
or
The desired brightness values of the sun
protection
function must be determined individually.
key briefly.
Set
key to activate and deactivate
the sun protection function is
deactivated.
activated
key.