Siemens DELTA i-system Komfort 5TC1 Serie Notice De Montage Et De Service page 46

GB
3. Selecting the memory location for the storage of switching times
Use the or
the selected program memory.
The key scrolls back to older switching times whereas the
switching times. New switching times will be sorted automatically.
Empty locations are at the end of the list and are indicated by the "——:——" symbol.
Info: The number of switching times to be stored is limited to 18 maximum. These times
can be distributed to 3 program memories (
(e.g. 9 UP and 9 DOWN times), the message 'FULL' appears at the end of the switching
time list.
Select the new memory location in which the new switching time is to be stored. Any
existing time in this location will be overwritten.
Prog Zufall Astro
C
Uhrzeit
Datum
Prog Zufall Astro
Uhrzeit
Datum
Prog Zufall Astro
Uhrzeit
Datum
Prog Zufall Astro
Uhrzeit
Datum
46
keys to browse through the list of switching times already stored in
Mo
Di
Mi
Do
Fr
Sa
So
Mo
Di
Mi
Do
Fr
Sa
So
Mo
Di
Mi
Do
Fr
Sa
So
Mo
Di
Mi
Do
Fr
Sa
So
Programming the switching times
, , ). When all 18 times are programmed
A B C
Confirm your choice by depressing
4. Selecting the running direction
Use the or
direction of the blind/shutter for which the new
switching time is to be executed. The corresponding
symbol on the display is flashing.
Confirm your choice by depressing
5. Setting the hour
Use the or
when the blind/shutter is to be raised or lowered.
Confirm your choice by depressing
6. Setting the minutes
Use the or
when the blind/shutter is to be raised or lowered.
Confirm your choice by depressing
key shows newer
Set
keys to select the running
Set
keys to set the hour (00...23)
Set
keys to set the minute (00...59)
Set
briefly.
briefly.
briefly.
briefly.