Technoline WD 2000 Instructions D'utilisation page 257

during configuration)
3. Plug in weather station with AC/DC power,
Press and hold "WIFI" button for 3 seconds
until "WI-FI AP" blinking on the device dis-
play. If the device is first enabled, it will au-
tomatically enter AP mode, and "WI-FI AP"
blinks on the display.
Please find and select "Weathertyp".
4.
5. Select the correct Wi-Fi network SSID and
Make sure Wi-Fi password you're inputting
is correct.
6. Follow the in-App instructions to pair the
weather station device:
When the notice of Device binding success-
ful Appears in the App. The weather station
device will automatically exit AP mode. If not
please press and hold "WIFI" button for 3
seconds to exit it.
7. Confirm the city of your current location:
Make sure your phone's location service are
turned on and allowed for this App.
Make sure that your current location city can
257