Troubleshooting - Beko DN162230ZDP Manuel D'utilisation

7

Troubleshooting

Please review this list before calling the service. It will save your time and money. This list
includes frequent complaints that are not arising from defective workmanship or material
usage. Some of the features described here may not exist in your product.
The refrigerator does not operate.
socket correctly. >>>
plug into the socket securely.
refrigerator is connected to or the
main fuse have blown out. >>>
Check the fuse.
Condensation on the side wall of the
fridge compartment (MULTIZONE,
COOL CONTROL and FLEXI ZONE).
install the refrigerator in places
where the temperature falls
below 10 °C.
Do not open and close the
>>>
door of refrigerator frequently.
install your refrigerator into highly
humid places.
open containers. >>>
food with liquid content in open
containers.
Close the door of the
ajar. >>>
refrigerator.
Set the thermostat to a
level. >>>
suitable level.
Compressor is not running
Insert the
Do not
Do not
Do not store
38
C
Protective thermic of the compressor
will blow out during sudden power
failures or plug-out plug-ins as the
refrigerant pressure in the cooling
system of the refrigerator has not
been balanced yet. The refrigerator
will start running approximately after
6 minutes. Please call the service if
the refrigerator does not startup at
the end of this period.
This is normal for a
cycle. >>>
full-automatically defrosting
refrigerator. Defrosting cycle
occurs periodically.
the socket. >>>
plug is fit into the socket.
correctly. >>>
temperature value.
Refrigerator returns to normal
operation when the power
restores.
The operation noise increases when the
refrigerator is running.
C
The operating performance of the
refrigerator may change due to the
changes in the ambient temperature.
It is normal and not a fault.
The refrigerator is running frequently or
for a long time.
EN
Make sure that the
Select the suitable